Filter
Top Products
71
TROUBLESHOOTING
(5) A blank horizontal line appears through
the text in the printed label.
1
Turn off the machine.
2
Open the tape compartment cover, then
remove the tape cassette if one is installed.
The print head and rollers are located in the
tape compartment.
3
Print head: Use a dry cotton swab to gently
wipe up and down along the print head.
Rollers: Use a dry cotton swab to wipe up
and down along each roller while rotating
them with your finger.
4
Install a tape cassette, close the tape com-
partment cover, and then try printing again.
5
If a blank streak still appears in the printed
label, repeat steps
2
through
4
using a
cotton swab dipped in isopropyl (rubbing)
alcohol.
If none of the above works, contact your service
representative.
Problem Solution
Print head
Print head
Rollers
Cotton swab