Filter
Top Products
OfficeServ 12 General Description Guide/Ed.01 CHAPTER 4. Business Feature Package
© SAMSUNG Electronics Co., Ltd. Page 4-22
Number table. If the digits match the table, the system will process the call without
requiring a forced code.
1.1.62 Paging
System software allows the use of four internal and four external paging zones.
Stations can page any individual zone, all internal zones, all external zones or all
zones simultaneously. Using system programming, each station may be allowed or
denied the abilities to make and/or receive page announcements to any zone or
combination of zones.
1.1.63 Park Orbits
The system has 10 park orbits(0-9). These orbits can be used to park calls prior to
paging and allows the call to be retrieved by dialing a park code plus the orbit number.
Calls parked in this manner can also be retrieved by dialing the park pickup code plus
the station or trunk number. This feature is in addition to Call Park and Page.
1.1.64 Prime Line Selection
Any station can be programmed to select a specific line, trunk group, telephone
number, station or station group when the handset is lifted or the speaker button is
pressed(same as Hot Line feature).
1.1.65 Private Lines
For private line use, stations can be prevented from dialing and/or answering any line.
1.1.66 Programmable Line Privacy
Each outside line can be programmed to ignore the automatic line privacy.
This allows up to four other parties to join your conversation by simply pressing the
line button. This is similar to 1A2 button telephone operation.
1.1.67 Programmable Timers
There are over 50 programmable system timers to allow each installation to be
customized to best fit the end user’s application.
1.1.68 Programmed Message Service
Programmed Messages can be set on each extension. The Programmed Messages are
displayed on the LCD screen when call arrives from another extension. 15 messages
are set at the system level and 5 messages are set separately for each extension.