Filter
Top Products
Restart Scenarios
98 4600 Series IP Telephone Installation Guide
9. The script file is processed. The software determines that the telephone’s boot code file
name (BOOTNAME) is not the latest version. APPNAME is set to the name of an
application file to replace the boot code. The following message displays while the
application file is downloaded into RAM:
where n is the number of KBs downloaded.
10. The following message displays while the application file is stored in flash memory:
where n is the percentage of the file stored, and x is the number of elapsed seconds. This
usually takes longer than the file download.
11. The following message displays while the telephone is reset so the application file can be
executed:
12. While the hardware is being initialized, the following message displays:
13. While either the new application file is uncompressed into RAM, the following message
displays:
This message counts the seconds as the application file (4620_031225.app in this
example) is being written into RAM.
14. When control is passed to the software that was just loaded, the following message
displays:
app_filename
n KB received
Saving to flash
n%, x secs
Restarting...
Initializing
Loading: 5 secs
4620_031225.app 4035 KB
Starting...