Filter
Top Products
Issue 6 February 2007 95
Appendix A: Restart Scenarios
Scenarios for the Restart Process
The sequence of the restart process depends on the status of the boot and application files.
This appendix explains the different scenarios possible.
Note:
Note: The display messages shown in this appendix do not apply to the 4601 IP
Telephone.
Restart the Telephone
Use the following procedure to restart the telephone.
1. While the telephone is on-hook and idle, press the following sequence of keys on the
faceplate of the telephone:
Mute 7 3 7 3 8 # (Mute R E S E T #)
Note:
Note: Press the Mute button momentarily. Do not press this key while pressing other
keys. The 4630/4630SW IP Telephones and the 4690 IP Conference Telephone
do not have a dedicated Hold button. For all other 4600 Series IP Telephones,
pressing the Hold button instead of the Mute button also works.
The following text displays left-justified at the top of the display:
2. Press the # button to continue the procedure.
The following text displays left-justified at the top of the display while the system values are
reset to defaults:
Once the system values are reset, the following prompt displays:
Reset values?
*=no #=yes
Resetting
values.
Restart phone?
*=no #=yes