Filter
Top Products
Introduction
8 4600 Series IP Telephone Installation Guide
Sets that support both protocols, for example, the 4610SW, do not support each protocol
simultaneously. Instead, a given telephone must be loaded with software that supports one
protocol or the other.
Telephones with H.323 software work only with Avaya Communication Manager call servers.
Telephones with SIP software are supported only in Avaya server environments.
Note:
Note: Unless otherwise indicated, references in this document to the DEFINITY
®
servers also refer to MultiVantage™ media servers.
Intended Audience
This document is intended for personnel who install the 4600 Series IP Telephones.
!
CAUTION:
CAUTION: Avaya does not support many of the products mentioned in this document. Take
care to ensure that there is adequate technical support available for the servers
involved, including, but not necessarily limited to, TFTP, DHCP, and SIP
Registration servers. If the TFTP, DHCP, or other servers are not functioning
correctly, the IP telephones might not be able to operate correctly.
Document Organization
The guide contains the following sections:
Chapter 1: Introduction Provides an overview of the 4600 Series IP Telephone
Installation Guide.
Chapter 2:
4600 Series IP
Telephone Installation
Describes the equipment and resources required to properly
install and operate the 4600 Series IP Telephones. Provides
instructions on installing the telephones out of the box.
Chapter 3: Local
Administrative Options
Describes how to set local administrative options, if requested by
the system or LAN administrator.
Chapter 4:
Troubleshooting
Guidelines
Describes error conditions and messages that might occur
during the installation of the 4600 Series IP Telephones.
Appendix A: Restart
Scenarios
Explains the different scenarios possible for the sequence of the
restart process.