Filter
Top Products
Pre-Installation Checklist
Issue 6 February 2007 21
Requirements to Verify for Each IP Telephone
10a. You have an extension number and an Avaya Communication Manager security code
(password) for each IP telephone.
Note: This checklist item applies only to H.323 telephones. However, to allow an H.323
telephone user to sign on to a SIP telephone, you must also establish that person’s User
ID and password on the SIP Enablement Services (SES) server.
10b. You have an OPTIM extension number and an Avaya Communication Manager security
code (password) for each SIP telephone. You have configured SIP Enablement Services
for each SIP telephone.
Note: This checklist item applies only to SIP telephones. However, to allow a SIP
telephone user to sign on to an H.323 telephone, you must also establish that person’s
User ID and password on Avaya Communication Manager.
10c. You have an 802.1X Supplicant Identity and password for each IP telephone (H.323 only)
if applicable to your environment. The MAC address of the telephone will be used as a
default ID and the default password will be Null if you do not provide values. For more
information, see 802.1X Supplicant Authentication
on page 37.
11. A Category 5e LAN jack is available at each telephone site.
12. Electrical power is provided to each telephone by a Telephone Power Module (DC power
jack) (must be ordered separately). If the LAN will supply IEEE-standard power to the
4601/4602/4602SW/4606/4610SW/4612/4620/4620SW/4621SW/4622SW/4624/
4625SW/4630SW, no power module is required.
Note:
Note: The 4630 IP Telephone does not support IEEE-standard power, and therefore requires
the Power Module.
The 4690 IP Conference Telephone is powered with a special LAN/power cable with a
power interface module included with this telephone.
13. 1 Category 5e modular line cord is available for the connection between the IP telephone
and the PC.
14. Verify that the 4600 Series IP Telephone package includes the following components:
● 1 telephone set
● 1 telephone handset, except the 4622SW and 4690 IP Conference Telephones
● 1 H4DU 9-foot long (when extended) 4-conductor coiled handset cord, plugged into
the telephone and the handset, except the 4690 IP Conference Telephone
● 1 Category 5 modular line cord for the connection from the IP telephone to the
Ethernet wall jack
● 4600 Series IP Telephone Safety Instructions (555-233-779)
● Power Brick for 4630 IP Telephones only
● Stylus for 4630/4630SW IP Telephones only
● Power Interface Module for the 4690 IP Conference Telephone only
15. IP telephones ship from the factory with H.323 software. Existing installations might also
have many IP telephones running H.323 software. For instructions on how to convert
between H.323 and SIP software, see Converting Software on Avaya 4600 Series IP
Telephones on page 42.
Optional Items for Some IP Telephones
16. If applicable to your current installation, verify that the following equipment/information is
present:
● 30A Switched Hub (applicable to the 4612/4624/4630 only)
● Stand Instructions, packaged with certain IP telephones