Filter
Top Products
Local Administrative Options
74 4600 Series IP Telephone Installation Guide
2. Enter a valid value between 0 and 7 for the new value of the 802.1 audio parameter.
The following text displays left-justified at the top of the display:
where d is the value of the 802.1 signaling parameter.
3. Enter a valid value between 0 and 7 for the new value of the 802.1 signaling parameter.
The following text displays left-justified at the top of the display:
where dd is the value of the Differential Services audio parameter.
4. Enter a valid value between 0 and 63 for the new value of the Differential Services audio
parameter.
The following text displays left-justified at the top of the display:
where dd is the value of the Differential Services signaling parameter.
5. Enter a valid value between 0 and 63 for the new value of the Differential Services
signaling parameter.
If no new values were entered during this procedure, the following text displays left-justified
at the top of the display:
6. Press # to terminate the procedure.
If new values were entered during this procedure, the following text displays left-justified at
the top of the display:
7. Press the * button to terminate the procedure, or the # button to save the new values.
If you press the # button, the following text displays:
The new values are saved, and the user interface is restored to its previous state.
L2 signaling=d
New=_
L3 audio=dd
New=_
L3 signaling=dd
New=_
No new values.
#=OK
Save new values?
*=no #=yes
New values
being saved