Audiovox Thero PDAs & Smartphones User Manual


 
11
SAFETY INSTRUCTIONS
CAUTION
Never place an AC Adapter on a wooden surface (or any other surface that could be marred by
exposure to heat) while it is in use. Since its surface temperature of the AC adapter increases
during normal use, always rest it on a suitable heat-insulating material.
Never cover the AC Adapter with any object while it is in use, and never place it adjacent to a
heat source. An excessive temperature increase could detrimentally affect its performance.
Never place a Power Supply Cable near a heat source, as damage to the cord or to its insulation
could result.
Always use a surge protector when utilizing the AC Adapter during an electrical storm.
Otherwise, a power surge could result in the loss of stored data.
Always use a surge protector when utilizing the AC Adapter near an electrical noise source such
as high voltage line or power source. Otherwise, a power surge could result in loss of stored
data.
In order to avoid any possibility of a fire, always insert the power plug into household electric
outlet supplying 120V AC.
When traveling abroad, never plug the AC Adapter into a power source that does not correspond
to both the voltage and the frequency specified on the rating plate of the AC Adapter, as
equipment damage and fire will result. When you connect to a power supply of more than 125V
AC, change the Power Supply Cable with one that corresponds to the power supply
specification. Failure to do so could cause a fire.
CAUTION
Never drop the AC adapter or subject it to severe shock. This may cause ignition or electric
shock, as well as damage to the adapter.
Always locate an accessory Power Supply Cable so that it will not be stepped on, tripped over,
or otherwise subjected to damage or stress.
Never place heavy objects on a Power Supply Cable, as this could result in damage to the cord.
Never bend or twist a Power Supply Cable, and never pull on a Power Supply Cable in an
attempt to remove an AC Adapter or accessory plug from a socket. Always grasp the AC Adapter
or the accessory plug directly when unplugging the Power Supply Cable in order to avoid
damaging the cable.
Always ensure the power plug pins are clean and free of dust or other foreign material by wiping
the pins with a clean dry cloth. Dust or other foreign material accumulation on the power plug
pins could cause fire.
Be certain to insert the power plug deeply into a socket. Failure to do so could cause a fire and
an electric shock.
Always disconnect the AC Adapter from the power source when it is not in use.