Filter
Top Products
10-18
P505 Smart PDA Phone
Infrared (IR) connectionInfrared (IR) connection
Infrared (IR) connectionInfrared (IR) connection
Infrared (IR) connection
By default, your device detects incoming infrared (IR) beams and
prompts you to accept them. If you do not want your device to
detect or receive beams, clear the
Receive all incoming beamsReceive all incoming beams
Receive all incoming beamsReceive all incoming beams
Receive all incoming beams
check box.
To set the Beam options:To set the Beam options:
To set the Beam options:To set the Beam options:
To set the Beam options:
1. Tap , then
SettingsSettings
SettingsSettings
Settings.
2. Tap the
Connections Connections
Connections Connections
Connections tab.
3. Tap the
Beam Beam
Beam Beam
Beam icon to display
the Settings screen.
Ending a connectionEnding a connection
Ending a connectionEnding a connection
Ending a connection
Use the following methods to end a network connection.
• When connected via modem or VPN, tap
on the navigation
bar, then tap
DisconnectDisconnect
DisconnectDisconnect
Disconnect.
• When connected via cable or cradle, detach your device from the
cable or cradle.
• When connected via Infrared, move the device away from the
other computer or device.
• When connected via a network (Ethernet) card, remove the card
from your device.
• When connected to a wireless network using an SDIO Wi-Fi card,
switch off the connection.