Filter
Top Products
Chapter 1: Getting started
1-11
Charging the device batteryCharging the device battery
Charging the device batteryCharging the device battery
Charging the device battery
The device includes a rechargeable Lithium Ion battery. You must fully
charge the battery before using the device for the first time. Initial
battery charging takes about four hours while it takes about 2.5
hours to fully charge the battery after initial use.
To charge the device battery:To charge the device battery:
To charge the device battery:To charge the device battery:
To charge the device battery:
Using the AC adapter Using the AC adapter
Using the AC adapter Using the AC adapter
Using the AC adapter
withwith
withwith
with
the cradle the cradle
the cradle the cradle
the cradle
1. Position the device on the
cradle as shown (A). Match
the connectors and carefully
insert the device until it fits
in place (B).
NOTENOTE
NOTENOTE
NOTE You can also charge a
spare battery using the
battery charger slot on the
cradle.
1
2
3
4
7
*
8
0
9
#
5
6
1
2
3
4
7
*
8
0
9
#
5
6
AA
AA
A
2. Connect the AC adapter plug
to the DC/USB cable plug.
3. Connect the DC/USB cable
plug to the DC/USB cable
connector at the back of the
cradle.
4. Connect the AC power plug
to a grounded wall socket.
33
33
3
44
44
4
The device battery starts charging as soon as you connect the AC
adapter plug to a power source. The cradle base lights up blue to
indicate that the device is properly seated on the cradle. If you
charge a spare battery in the battery charger slot, the cradle base
lights up orange until the spare battery is fully-charged.
The P505 Power LED lights up amber to indicate that the battery is
charging and lights up green when the battery is fully-charged.
IMPORTANTIMPORTANT
IMPORTANTIMPORTANT
IMPORTANT To disconnect the DC/USB cable plug from the system connector
or DC/USB cable connector on the cradle, simultaneously press
the release button on both sides of the plug, then pull.
Charge a spare battery here
22
22
2
BB
BB
B