Filter
Top Products
Advanced Network Settings
4-28 41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Configuring the IP Phones
Configuring VLAN (optional)
Use the following procedures to configure VLAN on the IP phone.
Note: VLAN is disabled by default. When you enable VLAN, the IP
phones use the default settings for each VLAN parameter. You can
change the default settings if required using the following procedure.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Virtual Local
Area Network (VLAN) Settings” on page A-18.
IP Phone UI
Step Action
1 For 9112i/9133i:
Press
Ion the phone to enter the Options List.
For 480i/480i CT:
Press % on the phone to enter the Options List.
2Select Network.
3 Select VLAN.
To globally enable/disable VLAN and set priority for non-IP packets:
4Select VLAN Enable, and press Change to set VLAN Enable to Yes (or No to disable)
5 Press Done to save the changes.
6Select Phone.
7Select Priority.
8Select Other and enter a non-IP priority value from 0 to 7 for non-IP packets.
9 Press Done to save the changes.
10 Press Done again to return to the VLAN Phone menu.
To set VLAN ID and priority for Port 0: