Filter
Top Products
Operational Features
5-8 41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Operational Features
Administrator Passwords
An administrator can change the administrator passwords on the phone using the
configuration files only.
An administrator can also assign a password for using the Options key on the IP
phone. You turn this feature on and off by entering the "options password
enabled" parameter followed by a valid value in the configuration files. Valid
values are 0 (false; Options key not password protected), or 1 (true; Options key
password protected). If this parameter is set to 1, a user has to enter a password at
the IP phone UI. If the password is entered correctly, the user is allowed to gain
access to the Options Menu and no more password prompts display for other
password protected screens. If the user fails to enter the correct password in three
attempts, access to the Options Mneu is denied and the IP phoen returns to the idle
screen.
Procedure
Use the following procedure to change the administrator password.
Configuration Files
For specific parameters you can set in the configuration files, seeAppendix A, the section, “Password
Settings” on page A-8.