Filter
Top Products
Administrator Level Options
41-001129-00 Rev 09, Release 1.4.1 3-9
Administrator Options
Administrator Options
The following information displays for phone status in the Aastra Web UI at the
location Status->System Information. This information is available to the user
and the administrator as read-only.
• Network Satus
Displays the network status of the Ethernet ports at the back of the phone. You
can also view the phone’s IP and MAC addresses. Information in this field
includes Link State, Negotiation, Speed, and Duplex for Port 0 and Port 1.
• Hardware Information
Displays the current IP phone platform and the revision number.
• Firmware Information
Displays information about the firmware that is currently installed on the IP
phone. Information in this field includes Firmware Version, Firmware Release
Code, Boot Version, Release Date/Time.
• Factory Default Feature
A user and administrator can restart the phone at Operation->Reset->Phone.
However, only an administrator has access to restoring factory defaults to the
IP phone at Operation->Reset->Current Settings.
There are two options for setting factory defaults using the Aastra Web UI:
- Restore to Factory Defaults
- Remove Local Configuration Settings
The "Restore to Factory Defaults" option resets the factory defaults for all of
the settings in the aastra.cfg, <mac>.cfg, and local configuration. Performing
this option results in losing all user-modified settings.
The "Remove Local Configuration Settings" option resets the settings on
the local IP phone configuration only.
Reference
For procedures in setting factory defaults, see Chapter 9, “Troubleshooting.”