Filter
Top Products
Softkey/Programmable Key Parameters
A-100 41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Appendix A
Programmable Key Settings for 9112i and 9133i
The value of "N" for the following parameters is dependent on the number of programmable keys
available on the 9112i/9133i models. See the table on page 93 for the applicable values.
Parameter –
prgkeyN type
Type
(in Web UI)
Aastra Web UI Operation->Programmable Keys
Configuration Files aastra.cfg, <mac>.cfg
Description The type of programmable key to configure. Valid types are:
• line (9133i only) - Indicates softkey is configured for line use.
• speeddial - Indicates programmable key is configured for speeddial
use
• dnd - Indicates programmable key is configured for do not disturb
on the phone. This option is "do not disturb" in the Aastra Web UI).
• blf (9133i only) - Indicates programmable key is configured for Busy
Lamp Field (BLF) use. User can dial out on a BLF configured key.
• list (9133i only; Aastra Web UI only) - Indicates programmable key
is configured for BLF list use. User can dial out on a BLF List
configured key.
• xml - Indicates programmable key is configured to accept an XML
application for accessing customized XML services. You can also
specify an XML softkey URL for this option.
• flash - Indicates programmable key is set to generate a flash event
when it is pressed on the 9112i and 9133i.
• The IP phone generates flash events only when a call is connected
and there is an active RTP stream (for example, when the call is not
on hold).
• spre - Indicates programmable key is configured to automatically
activate specific services offered by the server. For example, if the
spre value of *82 is configured, then by pressing the softkey, *82
automatically activates a service provided by the server.
• park - Indicates programmable key is configured to park incoming
calls when pressed.
• pickup - Indicates programmable key is configured to pick up
parked calls when pressed.
• lcr - Indicates programmable key is configured for “last call return”
when pressed.
Format Te xt
Default Value Not Applicable