Filter
Top Products
Setting Redial and Conf Keys as Speedials
You can set the Redial and Conf hard keys on the IP phone to use as speeddial
keys. When the Redial or Conf key is pressed, the number configured for the key
automatically speed dials. If no number is configured, the Redial and Conf keys
return to their original functionality.
You can configure this feature using the configuration files or the Aastra Web UI.
Using Redial Key for “Last Number Redial”
The IP phones
have an enhanced redial user interface that allows a user to
quickly redial the last number that was dialed out from the phone. You can:
• Press the REDIAL button twice to redial the last number dialed.
• Press the REDIAL button once, scroll the list of numbers, then press the
REDIAL button again to dial the number that displays on the screen.
This feature is static and is not configurable.
Use the following procedures to set the Redial and Conf keys as speeddial keys.
Note: If you configure the Redial and Conf keys for speeddialing on the
480i CT Base Station, the Redial and Conf keys on the 480i CT handset
retain their original functionality. The Redial and Conf keys on the
handset are not configured for speeddial.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Hard Key
Parameters” on page A-90..