Filter
Top Products
Configuration Server Protocol
4-12 41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Configuring the IP Phones
7 Enter the IP address of the protocol server (in dotted decimal format).
Use the following table to configure the applicable server.
IP Phone UI
Step Action
TFTP
-Select TFTP.
-Select Primary.
-Select Primary TFTP.
- Enter the IP address or qualified domain name of the primary TFTP server.
- Press Done to save the change.
Optional: You can also configure an alternate TFTP server if required. If Alternate TFTP is
enabled, you must also enter an IP address or qualified domain name for the alternate TFTP
server.
FTP
-Select FTP Server.
- Enter the IP address of the FTP server.
- Press Done.
Optional: You can enter a username and password for accessing the FTP server if required:
-Select FTP Username.
- Enter a username for accessing the FTP server.
- Press Done.
-Select FTP Password.
- Enter a password for accessing the FTP server.
- Press Done.
HTTP
-Select HTTP Server
- Enter the IP address of the HTTP server.
- Press Done.
-Select HTTP Path.
- Enter the HTTP sub-directory path name. If the IP phone’s files are located in a sub-directory
beneath the server’s HTTP root directory, the relative path to that sub-directory should be
entered in this field.
- Press Done.