Filter
Top Products
Administrator Level Options
3-8 41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Administrator Options
•Factory Default (admin only)
This option lets you reset the phone to its factory default settings. There are
two options in setting the factory defaults on the IP phone:
-All Defaults
-Config Only
The "All Defaults" option resets the factory defaults for all of the settings in
the aastra.cfg, <mac>.cfg, and local configuration. Performing this option
results in losing all user-modified settings.
The "Config Only" option resets the settings on the local IP phone
configuration only.
Phone Status via Aastra Web UI
In the Aastra Web UI, the "Network Status", "Hardware Information", and
"Firmware Information" options are read only and available for viewing by the
user and administrator. Resetting the IP phone to factory defaults using the Aastra
Web UI (Operation->Reset->Current Settings) is available to the administrator
only.