Filter
Top Products
Basic Preferences (Aastra Web UI)
An administrator can configure the following basic preferences using the Aastra
Web UI:
• Idle Display Name 1 and 2
The names that display on the idle screen rather than the user name and phone
number.
• Local Dial Plan
A dial plan that describes the number and pattern of digits that a user dials to
reach a particular telephone number.
• Dial Plan Terminator
A dial plan terminator or timeout. When you configure the IP phone to use a
dial plan terminator (such as the pound symbol (#)) the phone waits 4 or 5
seconds after you pick up the handset or press a key to make a call.
• Digit Timeout
Represents the time, in seconds, to configure the timeout between consecutive
key presses.
• Park Call (users and admin)
The parking of a live call to a specific extension.
• Pickup Parked Call (users and admin)
Picking up a parked call at the specified extension.
• Incoming/Outgoing Intercom Calls
Specifies whether the IP phone or the server is responsible for notifying the
recipient that an Intercom call is being placed. Also specifies the prefix code
for server-side Intercom calls, and specifies the configuration to use when
making the Intercom call.
Note: Users and administrators can configure incoming Intercom calls.
Only administrators can configure outgoing Intercom calls.