Filter
Top Products
Operational Features
5-114 41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Operational Features
2 Select an Intercom type for outgoing Intercom calls from the Type list box.
Valid values are Phone-Side, Server-Side, Off. Default is Off.
3 If Server-Side is selected, enter a prefix to add to the phone number in the "Prefix Code" field.
Note: For Sylantro servers, enter *96.
4 If Phone-Side or Server-Side is selected, select a line from the Line list box for which you want the IP
phone to use as its configuration on the Intercom call.
Note: The IP phone uses the configuration from the line you select from this list box. The call itself is
made using the first available line at the time of the call.
5 Click to save your changes.
You must restart your IP phone for the changes to take affect.
6 Click on Operation->Reset.
7 In the "Restart Phone" field click to restart the IP phone.
Incoming intercom settings:
1 Click on Basic Settings->Preferences->Incoming Intercom Settings.
Aastra Web UI