Filter
Top Products
Advanced Network Settings
4-26 41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Configuring the IP Phones
IP Phone UI
Step Action
1 For 9112i/9133i:
Press
Ion the phone to enter the Options List.
For 480i/480i CT:
Press % on the phone to enter the Options List.
2Select Network.
3Select Type of Service.
4Select SIP, RTP, and/or RTCP and enter a value from 0 to 63.
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map
the applicable priority to the Protocol setting as shown in the table “DSCP Range/VLAN Priority” on
page 4-25 For more information, see the section “Configuring VLAN (optional)” on page 4-28.
5 Press Done to save the changes.
6 Press Done 2 more times to return to the Options List menu.
7Select Phone Status.
8Select Restart Phone and press Restart to reboot the phone for the ToS/DSCP settings to take
affect.