Filter
Top Products
Administrator Level Options
41-001129-00 Rev 09, Release 1.4.1 3-15
Administrator Options
Administrator Options
Basic SIP Authentication Settings
• Screen Name
Name that displays on the idle screen. Valid values are up to 20 alphanumeric
characters. Configurable on a global and per-line basis.
• Phone Number
(User Name in IP phone UI and configuration files) User name used in the
name field of the SIP URI for the IP phone and for registering the phone at the
registrar. Valid values are up to 20 alphanumeric characters. Configurable on
a global and per-line basis.
• Caller ID
(Display Name in IP phone UI and configuration files). Name used in the
display name field of the "From SIP" header field. Some IP PBX systems use
this as the caller’s ID, and some may overwrite this with the string that is set
at the PBX system. Valid values are up to 20 alphanumeric characters.
Configurable on a global and per-line basis.
• Authentication Name
Authorization name used in the username field of the Authorization header
field of the SIP REGISTER request. Valid values are up to 20 alphanumeric
characters. Configurable on a global and per-line basis.
• Password
Password used to register the IP phone with the SIP proxy. Valid values are up
to 20 alphanumeric characters. Passwords are encrypted and display as
asterisks when entering. Configurable on a global and per-line basis.
• BLA Number
(not configurable via IP phone UI) Phone number that you assign to BLA
lines that is shared across all phones (global configuration) or shared on a
per-line basis (per-line configuration). For more information about BLA, see
Chapter 5, the section, “Bridged Line Appearance (BLA) (480i/480i CT/
9133i only)” on page 5-39.
• Line Mode
(Sip Mode in configuration files. Not configurable in IP phone UI). The
mode-type that you assign to the IP phone on a global or per-line basis. Valid
values are Generic (0), BroadSoft SCA (1), Nortel (2), or BLA (3). Default is
Generic (0).