Filter
Top Products
Advanced Network Settings
41-001129-00 Rev 09, Release 1.4.1 4-27
Configuring the IP Phones
Configuring the IP Phones
.
Aastra Web UI
Step Action
1 Click on Advanced Settings->Network->Type of Service,DSCP.
2 Choose a Protocol (SIP, RTP, and/or RTCP), and enter a value from 0 to 63.
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map
the applicable priority to the Protocol setting as shown in the table “DSCP Range/VLAN Priority” on
page 4-28 For more information, see the section “Configuring VLAN (optional)” on page 4-28.
3 Click to save your settings.
Note: The session prompts you to restart the IP phone to apply the configuration settings.
4Select Operation->Reset and click ..