Aastra Telecom 1000 IP Phone User Manual


 
Copyright IPitomy Communication, LLC 106 0007VRF
o Unconditional – Always route calls to a specific destination.
o Busy – Route calls to a specific destination when the extension is in use
or do not disturb is selected.
o No Answer – Route calls to a specific destination when a call is not
answered.
o Unavailable – Route calls to a specific destination when a phone is
turned off, is not registered with the system or has reached its call limit
(as set In the IP PBX).
Provisioning Forward Settings
o Pick the setting to be provisioned – Unconditional, Busy, No Answer
or Unavailable.
o Select Enabled or Disabled. Disabled turns the forward setting off.
Enabled turns the forward setting on.
If the Forward setting is Enabled, you can choose to select a destination from the
drop-down list. The IPitomy 1000 allows calls to be forwarded to a PSTN.
Forward calls to a PSTN number by entering it into the field provided. Calls can
be forwarded to any destination (or telephone number) in the drop-down list or
any telephone number.
Changing a Forwarding Number from an Extension
Only unconditional forwarding can be changed from a touch-tone keypad.
o Dial *90 to disable forwarding.
o Dial *91 to enable forwarding.
o Dial *92 to set the forwarding number.
Changing a Forwarding Number from a PC
1. Browse to the Smart Personal Console page.
2. Login.
3. Select a Destination for the chosen forward type.
4. Enter the telephone number.
Changing a Forwarding Number While Away from an Extension
Only unconditional forwarding can be changed from a touch-tone keypad.
When it is necessary to modify the forwarding setting while away from the office,
the IPitomy 1000 has a forwarding application built into the system. It is
necessary to have an automated attendant menu accessible from outside the
system. The forwarding gateway is selectable as an option from the Smart
Personal Console. When away from the office, it is possible to call into the
Automated Attendant, enter the digit setup to be the forwarding gateway. Here
users can turn forwarding on or off and enter a different number to forward calls
to.
1. Call into the Automated Attendant menu.
2. Select the touch-tone digit that has been set for modifying forwarding
settings.
3. The system will prompt for an Extension Number and Password.