3Com 5210 Telephone User Manual


 
Invocation Errors 89
Error: Too many targets specified
The user specified more than one IP address/slot-channel combination. (There
is more than one white space-separated word in the target list.)
Invalid target format
The target does not specify a valid IP address or host name.
Missing -T option
The user did not choose a test to execute using the -T option. (Non-GUI only)
<target>: Non-Modem Test operation
Reported in the test tool final summary when a command or other
non-modem test result is in the targets result table. (Non-GUI, warning only)
Program exit during execution
The command or test program was terminated (e.g., by a signal) while a
command or test was in progress. (Warning only)
IP Telephony Manager
Console
The following are the IP Telephony Manager Console error message and what
it indicates.
Error: Too many targets specified
The user specified more than one IP address/host name. (There is more than
one white space-separated word in the target list.)
Tone Send/Receive The following are the Tone Send/Receive error messages and what they
indicate.
Error: Invalid amplitude value <value>
The amplitude level given on the command line is out of range.
Error: invalid poll interval value <value>
The poll interval value given on the command line is not a positive integer.
Error: invalid test length value <value>
The test duration value given on the command line is not a positive integer
Error: No target specified
The user did not supply an IP address or host name on the command line.
Invalid target specification: <specification>
The target does not specify a valid IP address or host name.
Trap Destination The following are the Trap Destination error messages and what they indicate.