Filter
Top Products
108 APPENDIX : COMMAND LINE INTERFACE
Specifies slots or channels to be issued commands. Target has the following
format:
<IP-host>:S<s-range>[,C<c-range>][,S<s-range>
[,C<c-range>]...]
where IP-host can be IP-dot notation, or a host name that is defined in the
host database or /etc/hosts file.
■ :S<s-range>—decimal number or a range s1-s2 (where s1 and s2 are
decimal numbers and - is a literal hyphen) representing the location of
card(s) within the chassis.
■ :C<c-range>—decimal number or a range c1-c2 (where c1 and c2 are
decimal numbers and - is a literal hyphen) representing the location of
channel(s) on the specified card(s).
tcmget examples:
tcmget -G ’NMC Identification’ ’Serial Number’
192.77.203.74:S17
(or using substring matching rules)
tcmget -G ’nmc id’ ’serial number’ 192.77.203.74:S17
To list parameters in NMC tests and system group:
tcmget -L -G ’nmc tests’ -G ’system group’
192.77.203.74:S17
tcmset examples:
tcmset -G ’DTE Interface Settings’ ’Default DTE Data
Rate’ BPS19K\ mychas:s3c1
(or using substring matching rules)
tcmset -G ’dte int’ ’dte data rate’ bps19k mychas:s3c1
To list parameters in NMC Logging Group and Logging Traps Group:
tcmset -L -G ’logging gr’ -G ’logging tr’
192.77.203.74:S17