Filter
Top Products
3
NAVIGATING AND USING THE SYSTEM
This chapter describes the menus in the IP Telephony Manager. The function of
the menus can vary depending on the component, if that is the case, then you
are referred to that individual component’s user manual.
This chapter contains the following topics:
■ Accessing IP Telephony Manager Window
■ File Menu
■ View Menu
■ Configuration Menu
■ Fault Menu
■ Performance Menu
■ Security Menu
As an example, the descriptions in this section pertain to the CommWorks IP
Telephony Media Gateway. The server menus are similar to the windows
described here.
Accessing IP
Telephony Manager
Window
There are two main menus in the IP Telephony Manager. One is for the Media
Gateway chassis and the other one is for the Back-end Server(s), Gatekeeper,
or SIP Proxy Server.
To access the either main menu, from the command line prompt, type one of
these commands:
# xtcmvfpd
or
# xtcmvfpd <target chassis IP address>
The first command lists the chassis components. You then select the
component that you want to start. The second command, you specify the IP
address of the component that you want to start.
If the Media Gateway was specified:
The IP Telephony Manager Console window appears.