Filter
Top Products
42 CHAPTER 2: CONFIGURATION
5 Set Threshold Row Status to notinsservice.
6 Change the configuration as you need, refer to Ta ble 8
, and click Set.
7 Set the Threshold Row Status to active.
The following figure shows the Threshold Parameter drop-down list.
Figure 18 Editing Threshold Parameters Window
8 Click Set.
9 If you changed the threshold parameters on the Gatekeeper, SIP Proxy Server,
or any of the Back-end Servers, you must restart the SNMP agent. Refer to
Restarting Other Entities
in Chapter 4 for more information.
Threshold Traps IP Telephony Manager issues the following traps depending on the Threshold
event severity configured:
■ Threshold Warning
■ Threshold Critical
■ Threshold Informational
■ Threshold Warning Clear
■ Threshold Critical Clear
■ Threshold Informational Clear