3Com 5210 Telephone User Manual


 
122 APPENDIX : COMMAND LINE INTERFACE
target
An optional parameter that specifies the IP address or hostname of the NMC in
which stations are being configured
If no target is specified, the GUI behaves as if -h was the only parameter
passed.
The format for target is as follows:
<IP-host>
IP-host can be in IP-dot notation, or a host name that is defined in the host
database or /etc/hosts file
CLI Parameters (-q, -a,
-m, -d)
The CLI parameters must be supplied after the target at the end of the
command line. Any, or all of them can be used in any order. They are executed
in the order they appear in the command line.
These CLI parameters are described in the following table:
Table 14 CLI Parameter Descriptions
Parameter Description
-q Lists all Authorized Station currently configured in the target NMC and
then exits. This overrides the specification of -a, -m, or -d.
-a Adds an Authorized Station to the Authorized Station Table.
Ipaddr IP address of the new station.
Mask New network mask.
Comment New descriptive comment; use shell quoting as necessary.
-m Changes the network mask/comment of an Authorized Station.
Ipaddr IP address of entry to be modified.
Mask New network mask.
Comment New descriptive comment; use shell quoting as necessary.
-d Deletes an Authorized Station from the Authorized Station Table.
Ipaddr IP address of the entry to be deleted.