3Com 5210 Telephone User Manual


 
88 APPENDIX : ERROR MESSAGES
Extension is not sdl
Fatal Error (tcmsdl). Nonfatal error (xtcmsdl). This error occurs if the specified
SDL file does not have the correct extension (*.sdl).
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility terminates. For xtcmsdl, click OK to bring up the Select
Files dialog box and select a NAC file.
No default NAC file
Fatal Error (tcmsdl). Nonfatal error (xtcmsdl). This error occurs if the SDL file
was selected, but the NAC file was not.
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility terminates. For xtcmsdl, click OK to bring up the Select
Files dialog box and select a NAC file.
No default SDL file
Fatal Error (tcmsdl). Nonfatal error (xtcmsdl). This error occurs if the NAC file
was selected, but the SDL file was not.
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility terminates. For xtcmsdl, click OK to bring up the
Select Files dialog box and select the correct file
<filename> does not match card type <type>
Fatal Error (tcmsdl). Nonfatal error (xtcmsdl). This error occurs if the SDL file
and the NAC file apply to different card types.
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility terminates. For xtcmsdl, click OK to bring up the
Select Files dialog box and select the correct file.
Test Tool The following are the Test Tool error messages and what they indicate.
Error: invalid Loop Back Duration value <value> for -s option
The loopback duration given on the command line is not a positive integer.
Error: cannot use -T and -q at the same time
The user specified both a test and a test query. This is not allowed.
Error: No target specified
The user did not supply at least an IP address or host name on the command
line.