Filter
Top Products
975-0593-01-01 21
Advanced Settings
List of advanced settings include:
1. BKR Derating – sets the breaker derating to 80% or 100%.
2. GEN BKR Rating – sets the breaker rating for the generator.
3. GEN Warmup Delay – sets the generator warmup delay from 0 to 240
seconds.
4. Connect Sequence Delay – sets the reconnect delay from 4 to 60
seconds.
5. AC Disq Priority– sets a priority number from 1 (high) to 10 (low).
6. Nom DC Voltage – sets a DC voltage rating of 12.0 V or 24.0 V.
7. Circuit1 to Circuit10 – changes circuit level settings.
Six-circuit Freedom Sequence model (PN: 809-0912): AC circuits are
from Circuit1 to Circuit6 and the DC circuits are from Circuit7
to Circuit10.
Four-circuit Freedom Sequence model (PN: 809-0913): AC circuits
are from Circuit1 to Circuit4 and the DC circuits are from
Circuit5 to Circuit8.
Figure 10
Freedom Sequence Advanced Settings Screen
Enter Func
FSPM 00: Status
L2 Amps
Batt Voltage
Circuit Status
Config
0.0A
12.8V
Enter Func Enter Func
FSPM 00: Status
Batt Voltage
Circuit Status
Config
Advanced Settings
12.8V
FSPM 00: Advanced Settings
BKR Derating
GEN BKR Rating
GEN Warmup Delay
Connect Seq Delay
AC Disq Priority
Nom DC Voltage
Circuit1
Circuit2
Circuit3
Circuit4
Circuit5
Circuit6
Circuit7
Circuit8
Circuit9
Circuit10
[Enabled]
[30.0A]
[0sec]
[10sec]
[2]
[12.0V]
FSPM 00: Advanced Settings
[Enabled]
[30.0A]
[0sec]
[10sec]
BKR Derating
GEN BKR Rating
GEN Warmup Delay
Connect Seq Delay
Complete list of Advanced Settings
items.
Once the Advanced Settings item
appears from the Device Status
screen, scroll down (2) until
Advanced Settings is highlighted
then, Press Enter (3) to bring up the
Advanced Settings screen.
To activate a specific Advanced
Settings item, move through each item
using the Up and Down buttons (4).
When a selection is made, press the
Enter button to activate the highlighted
advanced setting.
To enable the selection of Advanced
Settings, press the Enter, Up, and
Down arrow buttons (1)
simultaneously from the Device
Status screen.
1234
FSequence IPM Owners Guide.book Page 21 Thursday, October 6, 2011 3:33 PM