Filter
Top Products
975-0593-01-01 3
Introduction
Compatible Products and Accessories
1
The Xanbus System Control Panel (SCP) enables you to monitor and
control all the power components of the Freedom Sequence power manager
from a single easy-to-use interface.
The Xanbus Automatic Generator Start (AGS) is a panel and a control
module system that provides automatic activation for your generator. If the
AGS is present in the Xanbus network, the power manager does not need
the B+ signal to be hardwired to the generator for it to receive generator-run
conditions.
Together with the Freedom SW Series Inverter/Charger, the power manager
provides advanced power optimization features of interactive charger de-
rating and automatic inverter assist to provide additional power to support
high peak power demands.
1.For an updated list, visit www.xantrex.com.
Product/Accessory Product Number
Freedom SW Series Inverter/Charger
(12 and 24-volt systems)
815-2012, 815-2024 (2kW)
815-3012, 815-3024 (3kW)
Xanbus System Control Panel (SCP) 809-0921
Xanbus Automatic Generator Start (AGS) 809-0915
25-ft network cable for SCP 809-0940
75-ft network cable for SCP 809-0942
FREEDOM SW
3012
FREEDOM SW
3012
I
n
v
e
r
t
er
Reset Enable
I
n
v
e
rter A
C/
On
C
ha
r
ge Fault
Freedom
inverter/charger
SCP
AGS
25-ft cable 75-ft cable
FSequence IPM Owners Guide.book Page 3 Thursday, October 6, 2011 3:33 PM