Filter
Top Products
12 Freedom Sequence Intelligent Power Manager Owner’s Guide
Basic Configuration Settings
List of circuit configurable settings includes:
1. Priority – a numerical circuit priority designation from 1 to 10
1
.
Each circuit will have a unique designation.
2. Load Shed – can be set to Disabled or Enabled
Figure 9
Freedom Sequence Circuit Configuration Screen
Enter Func Enter Func
FSPM 00: Status
L2 Amps
Batt Voltage
Circuit Status
Config
On 0.0A
12.8V
FSPM 00: Config
Mode
SHR BKR Mode
SHR BKR Rating
Circuit Config
[Operating]
[Auto]
[30.0A]
Enter Func
FSPM 00: Circuit Config
1 ACLoad1
1 Priority
1 Load Shed
2 ACLoad2
[1]
[Enabled]
FSPM 00: Circuit Config
1 ACLoad1
1 Priority
1 Load Shed
2 ACLoad2
2 Priority
2 Load Shed
3 ACLoad3
3 Priority
3 Load Shed
4 ACLoad4
4 Priority
4 Load Shed
5 ACLoad5
5 Priority
5 Load Shed
Cont
[1]
[Enabled]
[2]
[Enabled]
[3]
[Enabled]
[4]
[Enabled]
[5]
[Enabled]
FSPM 00: Circuit Config
6 ACLoad6
6 Priority
6 Load Shed
7 DCLoad1
7 Priority
7 Load Shed
8 DCLoad2
8 Priority
8 Load Shed
9 DCLoad3
9 Priority
9 Load Shed
10 DCLoad4
10 Priority
10 Load Shed
[6]
[Enabled]
[7]
[Enabled]
[8]
[Enabled]
[9]
[Enabled]
[10]
[Enabled]
Enter Func
FSPM 00: Config
Mode
SHR BKR Mode
SHR BKR Rating
Circuit Config
[Operating]
[Auto]
[30.0A]
Complete list of circuit configuration items.
To activate a specific configuration
setting, move through each item
using the Up and Down buttons (3).
When a selection is made, press the
Enter button (4) to activate the
highlighted configuration setting.
To activate the circuit configuration
screen, scroll down (5) until Circuit
Config is highlighted then,
press Enter (6) to bring up the screen.
To activate a specific circuit
configuration setting, move through
each item using the Up and Down
buttons (7). When a selection is
made, press the Enter button (8) to
activate the highlighted circuit
configuration setting.
From the Device Status screen, scroll
down (1) until Config is highlighted
then, press Enter (2) to bring up the
basic Configuration screen.
12
34
56
78
To display the next set of circuit
configurations, scroll down until Cont
is highlighted then, press Enter to bring
up the second screen.
NOTE: Use the Func button to exit out
of each screen.
1.1 to 8 for the Freedom Sequence four-circuit model PN: 809-0913.
FSequence IPM Owners Guide.book Page 12 Thursday, October 6, 2011 3:33 PM