Filter
Top Products
975-0593-01-01 11
Basic Configuration Settings
List of configurable settings includes:
1. Mode – can be set to Operating or Standby.
2. SHR BKR Mode – shore breaker mode can be set to Auto or Manual.
3. SHR BKR Rating – shore breaker rating sets the breaker amperage.
4. Circuit Config – brings up the Circuit Config screen. See next
page.
5. Restore Defaults loads back the OEM settings for all basic
configuration and advanced settings.
Figure 8
Freedom Sequence Basic Configuration Screen
Enter Func Enter Func
FSPM 00: Status
L2 Amps
Batt Voltage
Circuit Status
Config
On 0.0A
12.8V
FSPM 00: Config
Mode
SHR BKR Mode
SHR BKR Rating
Circuit Config
[Operating]
[Auto]
[30.0A]
FSPM 00: Config
Mode
SHR BKR Mode
SHR BKR Rating
Circuit Config
Restore Defaults
[Operating]
[Auto]
[30.0A]
Complete list of circuit configuration items.
To activate a specific configuration
setting, move through each item
using the Up and Down buttons (3).
When a selection is made, press the
Enter button (4) to activate the
highlighted configuration setting.
From the Device Status screen, scroll
down (1) until Config is highlighted
then, press Enter (2) to bring up the
basic Configuration screen.
12
34
NOTE: Use the Func button to exit out
of each screen.
FSequence IPM Owners Guide.book Page 11 Thursday, October 6, 2011 3:33 PM