Toshiba e740 PDAs & Smartphones User Manual


 
Bluetooth Settings Help
User's Manual 9-26
TOSHIBA Pocket PC e740 Version
1
Last Saved on 10/05/2002 21:02
ENGLISH using Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK
Unable to delete remote device.
Solution Try deleting the remote device again. If, after trying this, the
same message appears, restart Bluetooth Settings or reset
the Toshiba Pocket PC.
The device name that you entered exceeds the maximum byte count
of 248 bytes. Enter a different device name.
Cause The local device name exceeds 248 bytes after UTF-8
code conversion.
Solution Enter a local device name that does not exceed 248 bytes
after UTF-8 code conversion.
The retrieved information contains invalid data.
Cause The device information contains invalid data.
Solution Display the device list again or update the device
information with the remote device search.
Unable to retrieve some information.
Solution Display the device list again or update the device
information with the remote device search.
Unable to delete remote device due to insufficient memory. Check
the amount of available memory.
Cause There is insufficient memory to delete the device.
Solution Increase the amount of available memory and then try to
delete the device again.
Service list search failed due to insufficient memory. Check the
amount of available memory.
Solution Increase the amount of available memory and then try the
service list search again.
The maximum number of services (30) has been exceeded.
Cause The Toshiba Pocket PC has detected more than its
maximum number of services (30).
Solution Have the remote devices delete unneeded services, and
then update the service list.
Unable to successfully connect. Check the status.
Cause An error occurred while trying to connect to a device or
service.
Solution Check the status of the device or service and try
connecting again.
Unable to successfully disconnect. Check the status.
Cause An error occurred while trying to disconnect from a device
Solution Check the status of the device or service and try
disconnecting again.