Filter
Top Products
166
Using the CLIÉ handheld as a remote control
Quick-start button
3
Tap the on-screen buttons to remote-control the device.
Note
If you hear a long beep sound when you tap on a button, you are not able to
perform that operation with the CLIÉ Remote Commander application.
When you are able to perform an operation, you will hear a short beep
sound.
Operating devices directly with the Jog Dial navigator or the
application button
Follow the steps below to perform the assigned operation from the Jog
Dial navigator or the application buttons.
1
Start CLIÉ Remote Commander.
2
Use the Jog Dial navigator or the application buttons to
remote-control the device.
Viewing the device name assigned to each quick-start button
Tap a quick-start button and hold for over two seconds. The name of
the device assigned to each quick-start button is displayed.