Filter
Top Products
© 2003 - 2005 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
8
Network and Service Configuration Settings
The service provider or network administrator who supplied this unit may have provided pre-configuration
of the network and service settings. Depending on the configuration policy, end user access to the local
configuration settings may be restricted or inaccessible. If end user configuration is allowed, some of the
key network and service configuration setting instructions are describe in the following sections.
Please locate the following before using the phone:
# Item Instructions
1 User Guide This User Guide provides instructions on
functionality on the SPA-841 IP phone. The
User Guide is only available at
www.sipura.com/support
2 Quickstart Guide The Quickstart Guide explains how to set-up
and use the phone at a basic level.
3 Handset and
Cord
From the left side of the phone, please insert the
RJ-7 connector into the RJ-7 plug. Place the
handset into the holder on the left side of the
phone.
4 RJ45 Ethernet
Cable
On the rear of the phone, there is a port for an
RJ 45 Ethernet cable. Please plug the Ethernet
cable into this port. Plug the other end into and
available LAN switch port.
5 5 Volt Power
Supply
On the rear of the phone there is a socket for the
5 Volt power supply. Please plug the connector
into this socket on the phone and then into the
wall. Attach the wall interface clip connector
onto the power supply body. Slide the clip onto
the power supply until it clicks into place. Make
sure that it is secure before plugging it into the
wall socket.
6 Headset
connection
A headset may be plugged into the right side of
the phone. The phone works with 2.5mm
headset connectors. Headset not supplied.
7 Desk Stand / Wall
Mount Bracket
Optionally, the SPA-841 comes with a stand for
desk-top use or, by reversing this module on the
rear of the phone body, the phone can be wall
mounted.
SPA-841 with Desk Stand
SPA-841 with Wall Mount Bracket