Filter
Top Products
© 2003 - 2005 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
53
11 Non DHCP DNS 1
(Shortcut: "i", "9", “11”, "IP ADDRESS”, “ok”)
To use a non DHCP DNS 1, please press the “i” button, then press “9” – or scroll down to the “Network”
option and then press the “select” button. This is the left soft key button. Press “11” – or scroll down and
highlight Non DHCP DNS 1 and press the "select” button. This is the left soft key button. The display
shows the options to “save” or to “edit” the Non DHCP DNS 1. These are the left and right soft key
buttons, respectively.
To change the phone to use a Non DHCP DNS 1, please press the “edit” button, which is the right soft key
button. The display allows the option to enter an IP address. Please enter the IP Address of the DNS
Server 1. This IP address will be always be used by the phone (i.e. it is a static IP address). Erase
mistaken numbers, one at a time using the erase button, which is the right soft key button. After the IP
address has been entered, press the “ok” button, which is the left soft key button. The display will return to
the Non DHCP DNS 1 setting. The phone will begin to use the IP address immediately.
Note: To exit without making an entry, press the ">" button on the right top of the phone, the display
will show “clear” and “cancel”. Press the "cancel" button – the right soft key button – to exit.
12 Non DHCP DNS 2
(Shortcut: "i", "9", “12”, "IP ADDRESS”, “ok”)
This feature is configured in the same way as NON DHCP DNS 1. Please refer to that description for the
process.
13 Non DHCP NTP Server 1
(Shortcut: "i", "9", “13”, "IP ADDRESS”, “ok”)
To use a non DHCP NTP Server 1, then please press the “i” button, then press “9” – or scroll down to the
“Network” option and then press the “select” button. This is the left soft key button. The Network submenu
items will be displayed, press “13” – or scroll down to the highlight Non DHCP NTP Server 1 and press the
"
select" button. This is the left soft key button. The display shows the options to “save” or to “edit” the
Non DHCP NTP Server 1. These are the left and right soft key buttons, respectively.
To change the phone to use a Non DHCP NTP Server 1, please press the “edit” button, which is the right
soft key button. The display shows the option to enter an IP address. Please enter the IP Address of the
NTP Server1. This IP address will be always be used by the phone, i.e. it is a static IP address. Erase
mistaken numbers, one at a time using the “erase” button. This is the right soft key button. After IP
address has been entered, press the “ok” button. This is the left soft key button. The display returns to
the Non DHCP NTP Server1 setting. The phone will begin to use the IP address immediately.
Note: To exit without making an entry, press the ">" button on the right top of the phone, the display will
show “clear” and “cancel”. Press the "cancel" button (which is the right soft key button) to exit.
.
14 Non DHCP NTP Server 2
(Shortcut: "i", "9", “14”, "IP ADDRESS”, “ok”)
This feature is configured in the same way as NON DHCP NTP Server 1. Please refer to that description
for the process.