Filter
Top Products
© 2003 - 2005 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
52
9 Non DHCP Subnet Mask
(Shortcut: "i", "9", “9”, "SubNet Mask”, “ok”)
To use a non Non DHCP Subnet mask, then please press the “i” button, then press “9” – or scroll down to
the “Network” option and then press the “select” button. This is the left soft key button. The Network
submenu items will be displayed, press “9” – or scroll down to the highlight Non DHCP Subnet Mask and
press the "select" button. This is the left soft key button. The display shows the options to “save” or to
“edit” the Non DHCP Subnet Mask. These are the left and right soft key buttons, respectively.
To change the phone to use a Non DHCP Subnet Mask, please press the “edit” button. This is the right
soft key button. Enter the Submask configuration. This Submask will be always be used by the phone.
After the Submask is entered, press the “ok” button. This is the left soft key button. The display returns
to the Non DHCP Subnet Mask setting. The phone will begin to use the Submask immediately.
Note: To exit without making an entry, press the ">" button on the right top of the phone, the display
will show “clear” and “cancel”. Press the "cancel" button – the right soft key button – to exit.
10 Non DHCP Default Route
(Shortcut: "i", "9", “10”, "IP ADDRESS”, “ok”)
To use a Non DHCP Default Route, please press the “i” button, then press “9” – or scroll down to the
“Network” option and then press the “select” button. This is the left soft key button. The Network
submenu items will be displayed, press “10” – or scroll down to the highlight Non DHCP Default Route and
press the "select" button. This is the left soft key button. The display shows the options to “save
” or to
“edit” the Non DHCP Default Route. These are the left and right soft key buttons, respectively.
To change the phone to use a Non DHCP Default Route, please press the “edit” button, which is the right
soft key button. The display shows the option to enter an IP address. Please enter the IP Address of the
Non DHCP Default Route. This IP address will be always be used by the phone (i.e. it is a static IP
address). Erase mistaken numbers, one at a time using the erase button, which is the right soft key button.
After the IP address has been entered, press the “ok” button, which is the left soft key button. The display
returns to the Non DHCP Default Route setting. The phone will begin to use the IP address immediately.
Note: To exit without making an entry, press the ">" button on the right top of the phone, the
display will show “clear” and “cancel”. Press the "cancel" button (which is the right soft key button)
to exit.