Filter
Top Products
© 2003 - 2005 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
26
2 Speed Dial
Speed Dial allows a single numbered button (i.e. "2") to be pressed and the phone will automatically dial
that person's telephone, IP address, or URL as stored in the phone directory. Instructions for Setting up
and Using Speed Dial Number are provided below:
Setting up Speed Dial Numbers and Using Speed Dial Numbers
To set-up an entry in speed dial, press the " i " button and then press "2". Alternatively, press the "i" button
and scroll down until “SpeedDial” is highlighted and then press the "select" button, which is the left soft key
button.
The Speed dial menu shows numbers with "<Not Assigned>" next to them. To assign an entry to a
speed dial number, press that number (or scroll down until it is highlighted), then press “edit”, which is the
left soft key button. The menu will display “Enter Speed Dial 1”. There are two options to enter a person's
information.
Options to enter a Speed Dial Entry
Option 1 – (Enter a number, IP address or URI). – Enter a telephone number, an IP address or a URI into
a speed dial memory location. Use the Entering numbers and letters process described above. When
finished, press “ok” which is the left soft key button. The entry will be added to speed dial.
Option 2 - (Fill the Speed Dial with a name and number from the Directory) – To enter a directory entry into
a speed dial list, the user must enter in the name of the directory entry. As the user enters in letters, the
phone will display names in the directory that match the letters displayed. Use the scroll buttons at any time
to highlight to the name or type the name in completely. After highlighting a name (or typing in the name),
press “ok”, which is the left soft key button. The entry will be added to speed dial.
Enter Speed Dial Number
Ja
Jack
Jane
ok abc2ABC erase
S
S
I
I
P
P
U
U
R
R
A
A
User has used “5” to enter
“J” and “2” to enter “a”
Names from the directory
that match “Ja” are
displayed and can be
selected by scrolling down
and using “select” soft key