Filter
Top Products
© 2003 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
9
Enable/Disable DHCP
101
Enter 1 to enable
Enter 0 to disable
Check IP Address
110
None IVR will announce the
current IP address of SPA.
Set Static IP Address
111
Enter IP address
using numbers on
the telephone key
pad. Use the *
(star) key when
entering a decimal
point.
DHCP must be “Disabled”
otherwise you will hear,
“Invalid Option,” if you try
to set this value.
Check Network Mask
120
None IVR will announce the
current network mask of
SPA.
Set Network Mask
121
Enter value using
numbers on the
telephone key pad.
Use the * (star) key
when entering a
decimal point.
DHCP must be “Disabled”
otherwise you will hear,
“Invalid Option,” if you try
to set this value.
Check Static Gateway IP
Address
130
None IVR will announce the
current gateway IP
address of SPA.
Set Static Gateway IP
Address
131
Enter IP address
using numbers on
the telephone key
pad. Use the *
(star) key when
entering a decimal
point.
DHCP must be “Disabled”
otherwise you will hear,
“Invalid Option,” if you try
to set this value.
Check MAC Address
140
None IVR will announce the
MAC address of SPA in
hex string format.
Check Firmware Version
150
None IVR will announce the
version of the firmware
running on the SPA.
Enable/Disable Web
Server of SPA
7932
Enter 1 to enable
Enter 0 to disable
Requires Password
Manual Reboot of Unit
732668
None After you hear “Option
Successful,” hang-up. Unit
will reboot automatically.
Factory Reset of Unit
WARNING:
73738
Enter 1 to confirm
Enter * (start) to
cancel operation
SPA will prompt for
confirmation. After
confirming, you will hear
“Option Successful.” Hang-