Sipura Technology SPA-2000 Telephone Accessories User Manual


 
© 2003 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
46
Listen for dial tone
Press *61
Expected Call and Network Behavior With this service, incoming calls from up to __
telephone numbers can be automatically
identified by distinctive ringing. A distinctive
ringing pattern (i.e. short-long-short)
accompanies incoming calls from the
designated telephone numbers.
If the user is engaged in conversation and a
call from one of the designated numbers
arrives, a distinctive call waiting tone (i.e. short-
long-short) accompanies the incoming call.
Calls from other telephone numbers ring
normally.
User Action Required to Deactivate or End
To De-activate Press *81
4.2.20. Speed Calling – Up to Eight (8) Numbers or IP Addresses
Service Description The SPA supports user programming of up to 8
long distance, local, international or emergency
numbers and/or IP addresses for fast and easy
access.
User Action Required to Activate or Use Pick up the receiver
Listen for dial tone
Press *74
Dial the single digit code under which the
number is to be stored (2-9)
Dial the complete number to be stored just as if
you were going to dial it yourself
Listen for Confirmation tone (two short beeps)
Hang up or repeat the sequence
Note: To enter IP addresses, a graphical user
interface like a web browser must be used.
Expected Call and Network Behavior Pick up the receiver
Listen for dial tone
Press single digit code assigned to the stored
number (2-9)
Press # to signal dialing complete
The number is automatically dialed normally.
User Action Required to Deactivate or End None