Filter
Top Products
© 2003 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
36
Dial the telephone number you are calling
You must repeat this process at the start of
each call.
To block Caller ID on all outbound calls, do
the following:
Lift the receiver
Listen for dial tone
Press *67
Listen for dial tone
Dial the telephone number you are calling
Expected Call and Network Behavior The user activates this service to hide his
Caller ID when making an outgoing call.
User Action Required to Deactivate or End If you used *81 to block Caller ID, no action
required. This service is only in effect for the
duration of the current call.
If you used *67 to block Caller ID, do the
following:
Lift the receiver
Listen for dial tone
Press *66
Listen for dial tone
4.2.4. Call Waiting
Service Description The user can accept a call from a 3rd party while
engaging in an active call. The SPA shall alert the
subscriber of the 2nd incoming call by playing a call
waiting tone.
User Action Required to Activate or Use If you choose to answer the second call either:
Press and release your phone's switch hook (the
button you release when you take your phone off
the hook) or:
Press the “flash” button (if your phone has one).
This puts your first call on hold and automatically
connects you to your second call.
To put your second caller back on hold and return
to your first caller, press the switch hook or flash
button again. (You can alternate between calls as
often as you like.)