Filter
Top Products
© 2003 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
10
ALL SETTINGS WILL BE LOST!
up. Unit will reboot and all
configuration parameters
will be reset to factory
default values.
Note: If the Administrator password is not set, the items marked with “Requires Password” will not
require a password.
3.3. SPA Web Interface
The SPA provides a built-in web server. Convenient configuration and administration can be
performed through an integral web interface.
3.3.1. Web Interface Conventions
The SPA uses the following conventions with the web administration capabilities:
o The SPA-2000 web administration supports two privilege levels: Administrator and User. To
use the User privilege, simply point a web browser at the IP address of the SPA-2000; to use
the administrator privilege, use URL http://IP_Address_Of_SPA/admin
/. See 3.3.2 for more
information about administration privileges.
o Version 1.0 of the SPA supports Internet Explorer 5.5 and above and Netscape 7.0 and
above.
o The web configuration pages can be password protected. See 3.3.2 for more information
about password protect.
o The user name of web Administrator is : admin
o The user name of web User is : user
o Note: The user names for both administrator and User are fixed and cannot be
changed.
o After making changes to SPA-2000 configuration parameters, pressing “Submit All
Changes” button will apply all the changes and if necessary, automatically reboot the device.
Multiple changes may be made on multiple page tabs of the web interface at the same time.
Pressing “Submit All Changes” will apply all the modifications.
Important Note: switching between page tabs won’t apply the changes to SPA-2000, The
only way to apply the changes is to press the “Submit All Changes” button.
o If the “Undo All Changes” button is clicked, any modifications to profile parameters on any and
all pages will be reset back to their original values before modification.
NOTE: Pressing the “Undo All Changes” has no effect on the SPA-2000; it will only reset the
values on the web page.
3.3.2. Administration Privileges
The SPA-2000 supports two levels of administration privileges: Administrator and User, both
privileges can be password protected.
Important note: by factory default, there are no passwords assigned for both Administrator and User.
The Administrator has the privilege to modify all web profile parameters and can also modify the
passwords of both Administrator and User. A User only has the privilege to access part of the web