Filter
Top Products
© 2003 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
26
3.4.5.4. Dial Plan
Parameter Name Description Default
Dial Plan Per-line dial plan script See below
Enable IP Dialing Enable IP Dialing no
Default Dial Plan script for each line:
“(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxx|xxxxxxxxxxxx.)”
Explanation of Default Dial Plan:
Dial Plan Entry Functionality
*xx Allow arbitrary 2 digit star code
[3469]11 Allow x11 sequences
0 Operator
00 Int’l Operator
[2-9]xxxxxx US "local" number
1xxx[2-9]xxxxxx US 1 + 10-digit long distance number
xxxxxxxxxxxx. Everything else (Int’l long distance, FWD, ...)
Note: If IP dialing is enabled, one can dial [user-id@]a.b.c.d[:port], where ‘@’, ‘.’, and ‘:’ are dialed by
entering “*”, user-id must be numeric (like a phone number) and a, b, c, d must be between 0 and
255, and port must be larger than 255. If port is not given, 5060 is used. Port and User-Id are
optional. If the user-id portion matches a pattern in the dial plan, then it is interpreted as a regular
phone number according to the dial plan. The INVITE message, however, is still sent to the outbound
proxy if it is enabled.
3.4.5.5. Polarity Settings
Parameter Name Description Default
Idle Polarity Polarity before call connected Forward
Caller Conn Polarity Polarity after outbound call connected Reverse
Callee Conn Polarity Polarity after inbound call connected Reverse
Notes:
3.4.6. User 1 and User 2 Parameters
User 1/2 refers to the subscriber of Line 1/2. When a call is made from Line 1/2, SPA shall use the
user and line settings for that Line; there is no user login support in SPA v1.0. Per user parameter
tags must be appended with [1] or [2] (corresponding to line 1 or 2) in the configuration profile. It is
omitted below for readability.
3.4.6.1. Call Forward And Selective Call Forward/Blocking Settings
Parameter Name Description Default