Filter
Top Products
© 2003 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
24
Use OB Proxy In
Dialog
Whether to forcer SIP requests to be sent to the
outbound proxy within a dialog. Ignored if <Use
Outbound Proxy> is “no” or <Outbound Proxy> is
empty
Yes
Register Enable periodic registration with the <Proxy>. This
parameter is ignored if <Proxy> is not specified.
Yes
Make Call Without
Reg
Allow making outbound calls without successful
(dynamic) registration by the unit. If “No”, dial tone
will not play unless registration is successful
No
Ans Call Without Reg Allow answering inbound calls without successful
(dynamic) registration by the unit
No
Register Expires
1
Expires value in sec in a REGISTER request. SPA
will periodically renew registration shortly before
the current registration expired. This parameter is
ignored if <Register> is “no”. Range: 0 – (2
31
– 1)
sec
3600
Use DNS SRV Whether to use DNS SRV lookup for Proxy and
Outbound Proxy
No
Display Name Subscriber’s display name to appear in caller-id
User ID Subscriber’s user-id. Usually a E.164 number
Password Subscriber’s a/c password
Auth ID Subscriber’s authentication ID
Use Auth ID If set to “yes”, the pair <Auth ID> and <Password>
are used for SIP authentication. Else the pair <User
ID> and <Password> are used.
No
Notes:
1. If proxy responded to REGISTER with a smaller Expires value, the SPA will renew registration
based on this smaller value instead of the configured value. If registration failed with an “Expires too
brief” error response, the SPA will retry with the value given in the Min-Expires header in the error
response.
3.4.5.2. Supplementary Services Enable
The SPA-2000 provides native support of a large set of enhanced or supplementary services. All of
these services are optional. The parameters listed in the following table are used to enable or disable
a specific supplementary service. A supplementary service should be disabled if a) the user has not
subscribed for it, or b) the Service Provider intends to support similar service using other means than
relying on the SPA-2000.
Parameter Name Description Default
CW Serv Enable Call Waiting Service Yes
Block CID Serv Enable Block Caller ID Service Yes
Block ANC Serv Enable Block Anonymous Calls Service Yes
Dist Ring Serv Enable Distinctive Ringing Service Yes
Cfwd All Serv Enable Call Forward All Service Yes
Cfwd Busy Serv Enable Call Forward Busy Service Yes
Cfwd No Ans Serv Enable Call Forward No Answer Service Yes
Cfwd Sel Serv Enable Call Forward Selective Service Yes
DND Serv Enable Do Not Disturb Service Yes
CID_Serv Enable Caller ID Service Yes
CWCID Serv Enable Call Waiting Caller ID Service Yes