Filter
Top Products
© 2003 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
21
SIP Accept Language Accept-Language Header to be used by the unit.
If empty, the header is not included.
Remove Last Reg Remove last registration before registering a new one if value is
different one.
no
SIP T1 RFC 3261 T1 value (RTT Estimate). Range: 0 – 64 sec .5
SIP T2 RFC 3261 T2 value (Maximum retransmit interval for non-INVITE
requests and INVITE responses). Range: 0 – 64 sec
4
SIP T4 RFC 3261 T4 value (Maximum duration a message will remain in
the network). Range: 0 – 64 sec
5
SIP Timer B INVITE time out value. Range: 0 – 64 sec 32
SIP Timer F Non-INVITE time out value. Range: 0 – 64 sec 32
SIP Timer H INVITE final response time out value. Range: 0 – 64 sec 32
SIP Timer D ACK hang around time. Range: 0 – 64 sec 32
SIP Timer J Non-INVITE response hang around time. Range: 0 – 64 sec 32
INVITE Expires INVITE request Expires header value in sec. 0 = do not include
Expires header in INVITE. Range: 0 – (2
31
– 1)
180
ReINVITE Expires ReINVITE request Expires header value in sec. 0 = do not
include Expires header in the request. Range: 0 – (2
31
– 1)
30
Reg Min Expires Minimum registration expiration time allowed from the proxy in
the Expires header or as a Contact header parameter. If proxy
returns something less this value, then the minimum value is
used.
1
Reg Max Expires Maximum registration expiration time allowed from the proxy in
the Min-Expires header. If value is larger than this, then the
maximum value is used
7200
Reg Retry Intvl Interval to wait before the SPA retries registration again after
encountering a failure condition during last registration
30
SIT1 RSC
1
SIP response status code to INVITE on which to play the SIT1
Tone
SIT2 RSC
1
SIP response status code to INVITE on which to play the SIT2
Tone
SIT3 RSC
1
SIP response status code to INVITE on which to play the SIT3
Tone
SIT4 RSC
1
SIP response status code to INVITE on which to play the SIT4
Tone
Try Backup RSC SIP response status code on which to retry a backup server for
the current request
Retry Reg RSC Interval to wait before the SPA retries registration again after
encountering a failure condition during last registration
30
RTP Port Min
2
Minimum port number for RTP transmission and reception 16384
RTP Port Max
2
Maximum port number for RTP transmission and reception 16482
RTP Packet Size Packet size in sec. Valid values must be multiple of 0.01s.
Range: 0.01 – 0.16
0.02
Notes:
1. Reorder or Busy Tone will be played by default for all unsuccessful response status code
2. <RTP Port Min> and <RTP Port Max> should define a range that contains at least 4 even number
ports, such as 100 – 106
3.4.4.1. Dynamic Payload Types
Parameter Name Description Default