Filter
Top Products
© 2003 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
40
Press the switch hook or flash button on the
phone to place the party on hold
Enter *98
Dial the number to which you will transfer the
caller
The call is transferred when a complete
number is entered. You will hear a short
confirmation tone, followed by regular dial tone
Expected Call and Network Behavior When the user presses the switch hook or flash
button, the transferee is placed on hold. When
the user successfully dials the transfer number,
the transferee will automatically call the dialed
number.
User Action Required to Deactivate or End No applicable.
4.2.10. Call Hold
Service Description Call Hold lets you put a caller on hold for an
unlimited period of time. It is especially useful
on phones without the hold button. Unlike a
hold button, this feature provides access to a
dial tone while the call is being held.
User Action Required to Activate or Use Press the switch hook or flash button on the
phone to place the first party on hold. You will
hear a dial tone.
To make another call:
Enter the new number
To return to call on hold:
Hang up and the phone set will ring with the
first call on the line (or press Hook Flash again)
Expected Call and Network Behavior
User Action Required to Deactivate or End Hang-up the telephone.
4.2.11. Three-Way Calling
Service Description The user can originate a call to a 3rd party
while engaging in an active call.
User Action Required to Activate or Use Press the switch hook or flash button on the
phone to place the first party on hold
Listen for dial tone