Filter
Top Products
© 2003 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
28
Ring 1 Caller Caller number pattern to play Distinctive Ring/CWT 1
Ring 2 Caller Caller number pattern to play Distinctive Ring/CWT 2
Ring 3 Caller Caller number pattern to play Distinctive Ring/CWT 3
Ring 4 Caller Caller number pattern to play Distinctive Ring/CWT 4
Ring 5 Caller Caller number pattern to play Distinctive Ring/CWT 5
Ring 6 Caller Caller number pattern to play Distinctive Ring/CWT 6
Ring 7 Caller Caller number pattern to play Distinctive Ring/CWT 7
Ring 8 Caller Caller number pattern to play Distinctive Ring/CWT 8
Default Ring Default ringing pattern, 1 – 8, for all callers 1
Default CWT Default CWT pattern, 1 – 8, for all callers 1
Hold Reminder Ring Ring pattern for reminder of a holding call when the phone is on-
hook
None
Call Back Ring Ring pattern for call back notification None
Cfwd Ring Splash
Len
2
Duration of ring splash when a call is forwarded
(0 – 10.0s)
0
Cblk Ring Splash
Len
2
Duration of ring splash when a call is blocked (0 – 10.0s) 0
VMWI Ring Splash
Len
Duration of ring splash when new messages arrive before the
VMWI signal is applied (0 – 10.0s)
.5
Notes:
1. Caller number patterns are matched from Ring 1 to Ring 8. The first match (not the closest
match) will be used for alerting the subscriber.
2. Feature not yet available.
3.4.7. Regional Parameters
3.4.7.1. Call Progress Tones
Parameter Name Description Default
Dial Tone
1
Played when prompting the user to enter a phone
number
350@-19,440@-
19;10(*/0/1+2)
Second Dial Tone An alternative to <Dial Tone> when user tries to dial a 3-
way call
420@-19,520@-
19;10(*/0/1+2)
Outside Dial Tone
1
An alternative to <Dial Tone> usually used to prompt the
user to enter an external phone number (versus an
internal extension). This is triggered by a “,” character
encountered in the dial plan.
420@-16;10(*/0/1)
Prompt Tone
1
Played when prompting the user to enter a call forward
phone number
520@-19,620@-
19;10(*/0/1+2)
Busy Tone Played when a 486 RSC is received for an outbound call 480@-19,620@-
19;10(.5/.5/1+2)
Reorder Tone
1,2
Played when an outbound call has failed or after the far
end hangs up during an established call
480@-19,620@-
19;10(.25/.25/1+2)
Off Hook Warning
Tone
2
Played when the subscriber does not place the handset
on the cradle properly
480@-
10,620@0;10(.125/
.125/1+2)
Ring Back Tone Played for an outbound call when the far end is ringing 440@-19,480@-
19;*(2/4/1+2)
Confirm Tone This should be a brief tone to notify the user that the last
input value has been accepted.
600@-
16;1(.25/.25/1)"
SIT1 Tone An alternative to <Reorder Tone> played when an error 985@-16,1428@-