Sipura Technology SPA-2000 Telephone Accessories User Manual


 
© 2003 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
38
accepted.
4.2.6. Call-Waiting with Caller ID
Service Description When the user is on the phone and has Call
Waiting active, the new caller’s Caller ID
information will be displayed on the users
phone display screen at the same time the user
is hearing the Call Waiting beeps / tones.
User Action Required to Activate or Use The telephone equipment connected to the
SPA must support Call-Waiting with Caller ID.
Expected Call and Network Behavior In between call waiting tone bursts, the SPA
can generate a Caller-ID signal to the attached
phone when it is off hook.
User Action Required to Deactivate or End Not applicable.
4.2.7. Voice Mail
Service Description Service Providers may provide voice mail
service to their subscribers. Users have the
ability to retrieve voice mail via the telephone
connected to the SPA.
User Action Required to Activate or Use The SPA indicates that a message is waiting
by, playing stuttered dial tone when the user
picks up the handset.
To retrieve messages:
Lift the receiver
Listen for dial tone
Dial the phone number assigned to the SPA
You will be connected to the voice mail server
and prompted by a voice response system with
instructions to listen to your messages.
Expected Call and Network Behavior When voice mail is available for a subscriber, a
notification message will be sent from the
Voice Mail server to the SPA. When the user
dials their own phone number, the SPA
connects the subscriber their voice mail system
which can then connect them to their individual
voice mail box.
User Action Required to Deactivate or End Follow instructions of the voice mail system or
simply hang-up the telephone.