Filter
Top Products
© 2003 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
30
.1/9.3)
CWT7 Cadence Cadence script for distinctive CWT 7 30(.1/.1, .3/.1,
.1/9.3)
CWT8 Cadence Cadence script for distinctive CWT 8 2.3(..3/2)
Ring1 Name Name in an INVITE’s Alert-Info Header to pick distinctive
ring/CWT 1 for the inbound call
Bellcore-r1
Ring2 Name Name in an INVITE’s Alert-Info Header to pick distinctive
ring/CWT 2 for the inbound call
Bellcore-r2
Ring3 Name Name in an INVITE’s Alert-Info Header to pick distinctive
ring/CWT 3 for the inbound call
Bellcore-r3
Ring4 Name Name in an INVITE’s Alert-Info Header to pick distinctive
ring/CWT 4 for the inbound call
Bellcore-r4
Ring5 Name Name in an INVITE’s Alert-Info Header to pick distinctive
ring/CWT 5 for the inbound call
Bellcore-r5
Ring6 Name Name in an INVITE’s Alert-Info Header to pick distinctive
ring/CWT 6 for the inbound call
Bellcore-r6
Ring7 Name Name in an INVITE’s Alert-Info Header to pick distinctive
ring/CWT 7 for the inbound call
Bellcore-r7
Ring8 Name Name in an INVITE’s Alert-Info Header to pick distinctive
ring/CWT 8 for the inbound call
Bellcore-r8
Ring Waveform Waveform for the ringing signal Sinusoid
Ring Frequency Frequency of the ringing signal. Valid values are 10 – 100
(Hz)
25
Ring Voltage Ringing voltage. 60-90 (V) 70
CWT Frequency Frequency script of the call waiting tone. All distinctive
CWT is based on this tone.
440@-10
Notes:
3.4.7.3. Control Timer Values (sec)
Parameter Name Description Default
Hook Flash Timer Min Minimum on-hook time before off-hook to qualify as hook-
flash. Less than this the on-hook event is ignored. Range: 0.1
– 0.4 sec
0.1
Hook Flash Timer Max Maximum on-hook time before off-hook to qualify as hook-
flash. More than this the on-hook event is treated as on-hook
(no hook-flash event). Range: 0.4 – 1.6 sec
0.9
Callee On Hook Delay The phone must be on-hook for at this time in sec before the
SPA will tear down the current inbound call. It does not apply
to outbound calls. Range: 0 – 255 sec
0
Reorder Delay Delay after far end hangs up before reorder tone is played. 0 =
plays immediately, inf = never plays. Range: 0 – 255 sec
5
Call Back Expires Expiration time in sec of a call back activation. Ragne: 0 –
65535 sec
1800
Call Back Retry Intvl Call back retry interval in sec. Range: 0 – 255 sec 30
Call Back Delay Delay after receiving the first SIP 18x response before
declaring the remote end is ringing. If a busy response is
received during this time, the SPA still considers the call as
failed and keeps on retrying.
0.5
VMWI Refresh Intvl Interval between VMWI refresh to the CPE 0.5
Interdigit Long Timer
3
Long timeout between entering digits when dialing. Range: 0 –
64 sec
10